mosquit

    1. 刚刚学画PCB,大虾们给点意见,谢谢 58/18326 stm32/stm8 2011-02-27
                                         这个太难了,stm32封装就那样,引脚间距太小了
    2. 请教STM32视频显示 11/6142 stm32/stm8 2010-11-29
                                       
      3# IJK 我这边准备接7“彩色数字屏,怎么把CCTV的视频播放到屏上(连续的视频图像)?刷新的频率有多高
      建议去下载、看看ST的1篇AN:AN3241,QVGA TFT-LCD direct drive using the STM32F10xx FSMC peripheral
    3. 谁有ucosii在STM32的移植代码啊? 5/3341 stm32/stm8 2010-11-02
                                       
      没找到 figo_sun 发表于 2010-11-2 10:07 这都找不到: http://micrium.com/page/downloads/ports/arm
    4. ST发布双Cortex-A9核心的新一代处理器 27/9844 stm32/stm8 2010-08-16
                                       这么酷的处理器,价格也不会便宜,一份钱一份货
    5. 引用 9 楼 topplayers 的回复: 找了个sys里用的相似代码,一启动就蓝了,唉
      可以先用应用程序尝试调用内核API来创建进程,调试成功后再改成驱动程序,这样可以省些力气。
    6. 求波形测试代码 6/3154 嵌入式系统 2010-06-09
      恩,我试试
    7. WDM驱动程序中如何分配连续的物理内存 8/5889 嵌入式系统 2010-04-24
      不懂  关注一下
    8. 打印信息正常的话就说明按键的中断的产生与响应没有问题,应该是你所说的映射字符环节的问题吧。
    9. 这个模块谁用过???SIM508_EVB_V1.20 2/3055 嵌入式系统 2010-03-08
      是智能卡相关的串行通讯吗?
    10. 请问:74AHC573能否同时驱动8路光藕??? 6/3744 嵌入式系统 2010-03-05
      VCC or GND current :(max)+/-75mA 是指整个573工作的最大电流,即相当你对应的驱动电流最大才能75mA. 至于用它驱动8路光藕,得看你的8路光藕 所需要的驱动电流为多大? 要是一般的额光耦,我得可以用573驱动。 当然还是得看你的光耦的具体参数。
    11. 邦顶一下. 有些ARM7的平台上有叫DUMMY 的东西.
    12. 关于点阵数据转换问题 10/4533 嵌入式系统 2010-02-18
      下面是参照一本书写的 #include #define Dw 64 //显示区域长度 #define Dh 16 //显示区域高度 #define Lw 64 //LED屏宽度 #define Lh 16 //LED屏高度 #define Sw 16 //扫描宽度 #define EN_ON 1 #define EN_OFF 0 sfr Ctrl_port=0xa0; sfr Data_port=0x80; sbit E=P2^5; //显示允许控制端 sbit RCK=P2^6;//锁存信号 sbit SCK=P2^7;//移位信号 unsigned char code Display_Font[64][16]= { /*新*/   0x03,0x03,0x03,0x01,0x03,0x03,0x03,0x03,  0x03,0x03,0x03,0x03,0x01,0x03,0x03,0x03,   0x03,0x03,0x03,0x03,0x02,0x03,0x03,0x03,  0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,   0x03,0x03,0x03,0x01,0x03,0x03,0x03,0x03,  0x01,0x03,0x03,0x03,0x03,0x03,0x03,0x03,   0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,  0x03,0x03,0x01,0x03,0x03,0x03,0x03,0x03, //2   0x03,0x03,0x03,0x03,0x01,0x03,0x01,0x03,  0x03,0x03,0x03,0x01,0x01,0x01,0x03,0x03,   0x03,0x03,0x03,0x03,0x02,0x03,0x03,0x03,  0x03,0x03,0x03,0x03,0x02,0x03,0x03,0x03,   0x03,0x03,0x03,0x01,0x03,0x03,0x03,0x03,  0x01,0x03,0x03,0x03,0x03,0x03,0x03,0x03,   0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,  0x01,0x01,0x01,0x01,0x03,0x03,0x03,0x03, //3   0x03,0x01,0x01,0x01,0x01,0x01,0x01,0x01,  0x03,0x01,0x01,0x03,0x03,0x03,0x03,0x03,   0x03,0x03,0x03,0x02,0x02,0x02,0x02,0x02,  0x02,0x02,0x02,0x02,0x02,0x02,0x03,0x03,   0x03,0x03,0x03,0x01,0x03,0x03,0x03,0x03,  0x01,0x03,0x03,0x03,0x03,0x03,0x03,0x03,   0x03,0x03,0x03,0x01,0x01,0x01,0x01,0x01,  0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03, //4   0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,  0x03,0x01,0x03,0x03,0x03,0x03,0x03,0x03,   0x03,0x03,0x03,0x02,0x03,0x03,0x03,0x02,  0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,   0x03,0x01,0x03,0x01,0x01,0x03,0x01,0x01,  0x01,0x03,0x03,0x03,0x01,0x03,0x03,0x03,   0x03,0x03,0x03,0x01,0x03,0x03,0x03,0x03,  0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03, //5   0x03,0x03,0x01,0x03,0x03,0x03,0x01,0x03,  0x03,0x01,0x03,0x03,0x03,0x03,0x03,0x03,   0x03,0x03,0x02,0x03,0x03,0x03,0x03,0x02,  0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,   0x03,0x01,0x03,0x01,0x03,0x01,0x03,0x03,  0x01,0x01,0x01,0x01,0x01,0x01,0x03,0x03,   0x03,0x03,0x03,0x01,0x03,0x03,0x03,0x01,  0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,   //6   0x03,0x03,0x03,0x01,0x03,0x01,0x03,0x03,  0x03,0x01,0x03,0x03,0x03,0x01,0x03,0x03,   0x03,0x02,0x03,0x03,0x03,0x03,0x03,0x02,  0x03,0x03,0x03,0x02,0x03,0x03,0x03,0x03,   0x03,0x01,0x03,0x01,0x03,0x03,0x03,0x03,  0x01,0x03,0x03,0x03,0x01,0x03,0x03,0x03,   0x03,0x03,0x03,0x01,0x03,0x03,0x03,0x01,  0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,   //7   0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,  0x03,0x01,0x01,0x01,0x01,0x01,0x01,0x03,   0x03,0x03,0x03,0x02,0x02,0x02,0x02,0x02,  0x02,0x02,0x02,0x02,0x02,0x03,0x03,0x03,   0x01,0x03,0x03,0x01,0x03,0x03,0x03,0x03,  0x01,0x03,0x03,0x03,0x01,0x03,0x03,0x03,   0x03,0x03,0x03,0x01,0x03,0x03,0x03,0x01,  0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,   //8   0x03,0x03,0x03,0x01,0x03,0x01,0x03,0x03,  0x03,0x01,0x03,0x03,0x01,0x03,0x03,0x03,   0x03,0x03,0x03,0x02,0x03,0x03,0x03,0x02,  0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,   0x03,0x03,0x03,0x01,0x03,0x03,0x03,0x03,  0x01,0x03,0x03,0x03,0x01,0x03,0x03,0x03,   0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x01,  0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,      //9   0x03,0x01,0x01,0x01,0x01,0x01,0x01,0x03,  0x03,0x01,0x03,0x03,0x01,0x03,0x03,0x03,   0x03,0x03,0x03,0x02,0x03,0x03,0x03,0x02,  0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,   0x03,0x03,0x03,0x01,0x03,0x03,0x03,0x03,  0x01,0x03,0x03,0x03,0x01,0x03,0x03,0x03,   0x03,0x03,0x01,0x03,0x03,0x03,0x03,0x01,  0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,   //10   0x03,0x03,0x03,0x01,0x03,0x03,0x03,0x03,  0x03,0x01,0x03,0x03,0x01,0x03,0x03,0x03,   0x03,0x03,0x03,0x02,0x03,0x03,0x03,0x02,  0x03,0x03,0x03,0x03,0x03,0x02,0x03,0x03,   0x03,0x03,0x03,0x01,0x01,0x01,0x01,0x01,  0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x03,   0x03,0x01,0x03,0x03,0x03,0x03,0x03,0x01,  0x03,0x03,0x03,0x03,0x03,0x01,0x03,0x03,   //11   0x03,0x03,0x03,0x01,0x03,0x03,0x03,0x03,  0x03,0x01,0x03,0x03,0x01,0x03,0x03,0x03,   0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,  0x02,0x02,0x02,0x02,0x02,0x02,0x03,0x03,   0x03,0x03,0x03,0x01,0x03,0x03,0x03,0x03,  0x01,0x03,0x03,0x03,0x03,0x03,0x03,0x03,   0x03,0x01,0x01,0x01,0x01,0x01,0x01,0x01,  0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x03,   //12   0x03,0x03,0x01,0x01,0x03,0x01,0x03,0x03,  0x03,0x01,0x03,0x03,0x01,0x03,0x03,0x03,   0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x02,  0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,   0x03,0x03,0x03,0x01,0x03,0x03,0x03,0x01,  0x03,0x01,0x03,0x03,0x03,0x03,0x03,0x03,   0x03,0x03,0x03,0x03,0x01,0x03,0x03,0x01,  0x03,0x03,0x01,0x03,0x03,0x03,0x03,0x03,   //13   0x03,0x01,0x03,0x01,0x03,0x03,0x01,0x01,  0x01,0x03,0x03,0x03,0x01,0x03,0x03,0x03,   0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x02,  0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,   0x03,0x03,0x03,0x01,0x03,0x03,0x03,0x01,  0x03,0x03,0x01,0x03,0x03,0x03,0x03,0x03,   0x03,0x03,0x03,0x01,0x03,0x03,0x03,0x01,  0x03,0x03,0x03,0x01,0x03,0x03,0x03,0x03,   //14   0x01,0x03,0x03,0x01,0x03,0x03,0x03,0x01,  0x01,0x03,0x03,0x03,0x01,0x03,0x03,0x03,   0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x02,  0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,   0x03,0x03,0x03,0x01,0x03,0x03,0x01,0x03,  0x03,0x03,0x03,0x01,0x01,0x01,0x03,0x03,   0x03,0x03,0x01,0x03,0x03,0x03,0x03,0x01,  0x03,0x03,0x03,0x01,0x01,0x03,0x03,0x03,   //15   0x03,0x01,0x03,0x01,0x03,0x03,0x01,0x03,  0x03,0x03,0x03,0x03,0x01,0x03,0x03,0x03,   0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x02,  0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,   0x03,0x03,0x03,0x01,0x03,0x01,0x03,0x03,  0x03,0x03,0x03,0x03,0x01,0x03,0x03,0x03,   0x03,0x01,0x03,0x03,0x03,0x01,0x03,0x01,  0x03,0x03,0x03,0x03,0x01,0x03,0x03,0x03,   //16   0x03,0x03,0x01,0x03,0x03,0x03,0x03,0x03,  0x03,0x03,0x03,0x03,0x01,0x03,0x03,0x03,   0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x02,  0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,   0x03,0x03,0x03,0x01,0x01,0x03,0x03,0x03,  0x03,0x03,0x03,0x03,0x01,0x03,0x03,0x03,   0x03,0x03,0x03,0x03,0x03,0x03,0x01,0x03,  0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03 }; void display(unsigned int XL,unsigned int YL,unsigned int display_count) {         unsigned char line;         unsigned char col;         unsigned char code *ram_point ;         unsigned int k,ram_begin_addr;         for(k=0;k
    13. 关于linphone在ARM上的移植 4/5190 ARM技术 2009-12-18
      我也一样啊,
    14.                                  电子秤里边最基本的“去皮”功能,呵呵 想一想,你每次放上去的托盘重量都一样吗?如果某次放个篓子上去呢?
    15.                                  谁又在挖坟……
    16. lcd 驱动问题,cpu(80接口)转rgb接口的方法 7/3727 嵌入式系统 2009-11-26
      具体没用过S1D13775BGA控制器,但好像不影响你的使用。只是将以前的80接口变成RGB接口,这主要取决于你的CPU是否有LCD controller模块,如果CPU中有LCD controller应该同时支持RGB和80接口,只要根据CPU的datasheet设置相关寄存器即可。但如果你的CPU没有LCD Controller接口,你以前是用总线方式点亮LCD的话,那么是用不了RGB接口的屏的。
    17. 问下各位,样机的说明书一般都是谁下? 8/3434 嵌入式系统 2009-11-23
      不管是否有专人,初稿都是要研发作者起草。 有了初稿,那就再说了。
    18. 新手指导多谢! 4/2869 嵌入式系统 2009-11-22
      怎么入门? 首先看你目前所处的环境, 如果你还在学校,建议你多和搞这样的电子爱好者,一起多交流,学习;利用开发板进行 入门的学习。 如果你已经工作,那你最好买块不错的开发板,对照上面的指导,一步步实践 加 修改,加体会 再创新的学习。最好能结合项目,有人带。
    19. 九八大慶, 散分 52/8599 嵌入式系统 2009-09-26
      JF
    20. 如果让你写一个这样的程序,程序功能如下 "当用i6扫过一个条码后,msgbox到扫描到的信息" (界面不是问题,问题是我的程序怎么取得扫描到的条码。)。 ---------------------------------------------------------------------- 否有人把这个功能的代码贴上(请注明程序需要另外添加的控件什么的),或是打包发给我油箱也行,qqmail:601384402@qq.com ,程序应该不会很多行吧。 我照着学就行了,谢谢大家!

最近访客

< 1/1 >

统计信息

已有80人来访过

  • 芯积分:--
  • 好友:--
  • 主题:15
  • 回复:50

留言

你需要登录后才可以留言 登录 | 注册


现在还没有留言