szshixiaming

    1. F28035 RAM不能仿真 5/6858 微控制器 MCU 2014-10-09
      这是截图
    2. F28035 RAM不能仿真 5/6858 微控制器 MCU 2014-10-09
      这个地址好像会变的。这一次是0x3f6013,我发现在CMD文件中所定义的没有包括0x3f6013地址的: MEMORY { PAGE 0 :             BEGIN                   : origin = 0x000000,        length = 0x000002         BOOT_RSVD           : origin = 0x000002,        length = 0x00004E                     RAMM0                   : origin = 0x000050,        length = 0x0003B0         progRAM                   : origin = 0x008000,        length = 0x001800         IQTABLES       : origin = 0x3FE000, length = 0x000B50    /* IQ Math Tables in Boot ROM */         IQTABLES2      : origin = 0x3FEB50, length = 0x00008C    /* IQ Math Tables in Boot ROM */         IQTABLES3      : origin = 0x3FEBDC, length = 0x0000AA         /* IQ Math Tables in Boot ROM */         RESET          : origin = 0x3FFFC0, length = 0x000002         BOOTROM        : origin = 0x3FF27C, length = 0x000D44                          PAGE 1 :         RAMM1                   : origin = 0x000480,        length = 0x000380         dataRAM                    : origin = 0x009800,        length = 0x000800         CLA_CPU_MSGRAM : origin = 0x001480, length = 0x000080         CPU_CLA_MSGRAM : origin = 0x001500, length = 0x000080 } SECTIONS {    codestart        : > BEGIN,      PAGE = 0    ramfuncs         : > RAMM0,      PAGE = 0      .text            : > progRAM,    PAGE = 0    .cinit           : > RAMM0,      PAGE = 0    .pinit           : > RAMM0,      PAGE = 0    .switch          : > RAMM0,      PAGE = 0    .reset           : > RESET,      PAGE = 0, TYPE = DSECT        .stack           : > RAMM1,      PAGE = 1    .ebss            : > dataRAM,    PAGE = 1    .econst          : > dataRAM,    PAGE = 1          .esysmem         : > RAMM1,      PAGE = 1    IQmath           : > progRAM,    PAGE = 0    IQmathTables     : > IQTABLES,         PAGE = 0, TYPE = NOLOAD    Cla1ToCpuMsgRAM  : > CLA_CPU_MSGRAM, PAGE = 1    CpuToCla1MsgRAM  : > CPU_CLA_MSGRAM, PAGE = 1 /* Uncomment the section below if calling the IQNexp() or IQexp()       functions from the IQMath.lib library in order to utilize the       relevant IQ Math table in Boot ROM (This saves space and Boot ROM       is 1 wait-state). If this section is not uncommented, IQmathTables2       will be loaded into other memory (SARAM, Flash, etc.) and will take       up space, but 0 wait-state is possible.    */    /*    IQmathTables2    : > IQTABLES2, PAGE = 0, TYPE = NOLOAD    {               IQmath.lib (IQmathTablesRam)    }    */    /* Uncomment the section below if calling the IQNasin() or IQasin()       functions from the IQMath.lib library in order to utilize the       relevant IQ Math table in Boot ROM (This saves space and Boot ROM       is 1 wait-state). If this section is not uncommented, IQmathTables2       will be loaded into other memory (SARAM, Flash, etc.) and will take       up space, but 0 wait-state is possible.    */    /*    IQmathTables3    : > IQTABLES3, PAGE = 0, TYPE = NOLOAD    {               IQmath.lib (IQmathTablesRam)    }    */ }     SECTIONS {         DLOG: > dataRAM,PAGE=1 }
    3. F28035 RAM不能仿真 5/6858 微控制器 MCU 2014-10-09
      ltbytyn 发表于 2014-10-8 17:28 CMD文件没有换成ram模式的
      这个应该不会吧?我选了ACTIVE-F2803X_RAM时,项目窗口上F28035_FLASH_HVPM_Sensorles.CMD是灰色的;反之,选了ACTIVE-F2803X_FLASH时,项目窗口上F28035_RAM_HVPM_Sensorles.CMD是灰色的.而且这些文件都是CONTROLSUIT里面直接导过来的。今天又奇怪的碰到了FLASH也出现同样的问题,怎么重新编译怎么重新下载都没用,始终出现No source available for "0x3ff599"。我怀疑CCS编译有RELEASE和DEBUG的选项,不知道在哪里设置?

最近访客

< 1/1 >

统计信息

已有2人来访过

  • 芯积分:--
  • 好友:--
  • 主题:1
  • 回复:3

留言

你需要登录后才可以留言 登录 | 注册


现在还没有留言