回复了主题帖： 拆一个Jlink V11

Application log started  - J-Flash V7.66b (J-Flash compiled May 30 2022 14:13:04)  - JLinkARM.dll V7.66b (DLL compiled May 30 2022 14:12:40) Reading flash device list [C:\Program Files\SEGGER\JLink_V766b\ETC/JFlash/Flash.csv] ...  - List of flash devices read successfully (451 Devices) Reading MCU device list ...  - List of MCU devices read successfully (9287 Devices) Creating new project file [C:\Users\bryan.li\AppData\Roaming\SEGGER\Default.jflash] ...  - New project created successfully Connecting ...  - Connecting via USB to probe/ programmer device 0  - Probe/ Programmer firmware: J-Link V9 compiled May  7 2021 16:26:12  - Device "CORTEX-M0" selected.  - Target interface speed: 4000 kHz (Fixed)  - VTarget = 3.267V  - RESET (pin 15) high, but should be low. Please check target hardware.  - Failed to attach to CPU. Trying connect under reset.  - RESET (pin 15) high, but should be low. Please check target hardware.  - RESET (pin 15) high, but should be low. Please check target hardware.  - RESET (pin 15) high, but should be low. Please check target hardware.  - RESET (pin 15) high, but should be low. Please check target hardware.  - RESET (pin 15) high, but should be low. Please check target hardware.  - RESET (pin 15) high, but should be low. Please check target hardware.  - ERROR: Failed to connect. Could not establish a connection to target. 各位大佬，想问下显示这段代码怎么解啊，给其它MCU烧不了都